mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sunroof / Moonroof Relay > < Sunroof / Moonroof Motor|Testing and Inspection
Page 1
background image

Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL

1. Disconnect the negative battery cable.
2. Remove the headliner.
3. Disconnect the connector.
4. Remove the screws, and then remove the sunroof motor.

SUNROOF MOTOR INSTALLATION

1. Connect the sunroof motor connector.
2. Connect the sunroof switch connector.
3. Connect the negative battery cable.
4. Turn the ignition switch to ON position.
5. Press the CLOSE side of the slide switch until the sunroof motor stops.
6. Disconnect the sunroof switch connector.
7. Install the screws, and then install the sunroof motor.
8. Install the headliner.

Sunroof / Moonroof Relay > < Sunroof / Moonroof Motor|Testing and Inspection