mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes > < Brake Proportioning/Combination Valve|Specifications|Page 2935
Page 1
background image

Brake Proportioning/Combination Valve: Service and Repair

DUAL PROPORTIONING VALVE (WITHOUT ABS) AND BRAKE PIPE JOINT (WITH ABS) REPLACEMENT 

1. Remove the ignition coil.

2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.

Dual Proportioning Valve (Without ABS) or Brake Pine Joint (With ABS) Installation Note  

1. Install the dual proportioning valve so that the R mark faces the left side of the vehicle.

Hydraulic Control Assembly - Antilock Brakes > < Brake Proportioning/Combination Valve|Specifications|Page 2935