MPV ES V6-2.5L DOHC (2001)
10.
Prepare to install the "plate" and modify the "case rib" area shown in FIGURE 5.
11.
Place shop rags under the blend door area.
12.
Close blend door and position plate so there is a 2 mm gap between the blend door and plate when the blend door is closed as shown in FIGURE
6.
13.
Using the plate as a template, hold in position and mark the two (2) holes for drilling.
WARNING:
Be sure to wear safety glasses before drilling.
14.
Drill two (2) holes using a 5/32" drill bit.
15.
Attach the plate to the cooling unit case with two (2) 5/32" pop rivets with 13 mm "Grip Range."
