MPV ES V6-2.5L DOHC (2001)
5.
Remove one (1) screw holding the small white plastic cover found on the opposite side, then remove the cover according to FIGURE 2.
6.
Remove three (3) screws holding the heater case, then remove the heater case according to FIGURE 3.
7.
Position A/C cooling unit to remove five (5) screws and seven (7) small clips holding front evaporator cover according to FIGURE 4.
8.
Pull evaporator cover off.
9.
Remove the evaporator from the cooling unit and carefully set aside to prevent any damage to the evaporator cooling fins.