MPV ES V6-2.5L DOHC (2001)
Transmission Position Switch/Sensor: Testing and Inspection
TRANSAXLE RANGE (TR) SWITCH INSPECTION
Note:
-
Input signals of the TR switch can be inspected with a NGS tester.
Inspection of Operation
1. Verify that the starter operates only with the ignition switch at the START position and the selector lever in P and N positions.
^
If not as specified, inspect for continuity at the TR switch.
2. Verify that the back-up lights illuminate when shifted to R position with the ignition switch at the ON position.
^
If not as specified, inspect for continuity at the TR switch.
Inspection of Continuity
1. Disconnect the TR switch connector.
1 of 2
2 of 2
2. Inspect for continuity at the TR switch.
^
If not as specified, adjust the TR switch, then reinspect the TR switch.
3. Connect the TR switch connector.
