mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Body - Power Windows are Inoperative|Page 3149 > < Body - Power Windows are Inoperative|Page 3143
Page 1
background image

Technical Service Bulletin # 0901105

Date: 051201

Body - Power Windows are Inoperative

TSB: 09-011/05

2000-2006 MPV - POWER WINDOWS INOPERATIVE - BLOWN FUSE

APPLICABLE MODEL(S)/VINS
2000 - 2006 MPV

DESCRIPTION

On some vehicles, the power windows may become inoperative due to a blown 30A power window circuit fuse. Performing the repair procedure in this
Service Bulletin will increase the power window circuit capacity from 30A to 40A.

Customers having this concern should have their vehicle repaired using the following repair procedure.

NOTE:

To complete this repair, the following components are required (refer to Parts Information table for part numbers):

^

1 - Wire Harness Repair Kit

^

1 - Rear Sliding Door Contact (RH - B-Pillar)

^

1 - Rear Sliding Door Contact (LH - B-Pillar)

^

2 - Rear Sliding Door Contacts (Sliding Door)

^

1 - 40A fuse

^

Electrical tape

PART(S) INFORMATION

WARRANTY INFORMATION

NOTE:

^

This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for
warranty term information.

^

Additional diagnostic time cannot be claimed for this repair.

Repair Procedure

REPAIR PROCEDURE

Body - Power Windows are Inoperative|Page 3149 > < Body - Power Windows are Inoperative|Page 3143