MPV ES V6-2.5L DOHC (2001)
1. Disconnect the motor wire from terminal M.
2. Connect battery positive voltage to terminal M and ground the starter body.
3. Pull out the drive pinion with a screwdriver. Verify that it returns to its original position when released.
-
If does not return, repair or replace the starter.
Pinion Gap Inspection
1. Pull out the drive pinion with battery positive voltage connected to terminal S and the starter body grounded.
CAUTION: Applying power for more than 10 seconds can damage the starter. Do not apply power for more than the aforementioned time.
2. Measure the pinion gap while the drive pinion is pulled.
-
If not as specified, adjust with an adjustment washer (between drive housing front cover and magnetic switch).
Specification
0 mm {0 in}
Starter Inner Parts Inspection Armature
