MPV ES V6-2.5L DOHC (2001)
Control Arm: Service and Repair
FRONT LOWER ARM REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Dust Boot Removal Note
1. Remove the dust boot using a chisel, being careful not to damage the ball joint and the arm.
Lower Arm Bushing (Front) Removal Note
1. Cut away the projecting rubber of the lower arm bushing.
2. Set the SST onto the lower arm, and remove the bushing.
Lower Arm Bushing (Rear) Removal Note
