MPV ES V6-2.5L DOHC (2001)
4. Squeeze the header tabs down in order as shown against the lip of radiator outer tank base with locking-type pliers while rotating the pliers toward
the tank.
5. Verify the height of the header tabs is same as the height before removal.
6. Inspect for the leakage of radiator according to the following procedure.
1) Cover the radiator inlet and outlet.
2) Cover the ATF cooler inlet and outlet.
3) Connect a radiator tester.
4) Apply pressure of 145 kPa (1.5 kgf/m2, 21 psi) and verify that the pressure is held.
