MPV ES V6-2.5L DOHC (2001)
Liftgate Window Glass: Service and Repair
REAR WINDOW GLASS REMOVAL
1. Remove the rear wiper arm and blade.
2. Remove the liftgate lower trim.
3. Apply protective tape along the edge of body to protect it from damage.
WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
NOTE: The rear window molding is a replacement part.
4. Remove the lip of the rear window molding using a razor.
Not Reusing Rear Window Glass
NOTE: For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under "Reusing rear window glass".
1. Use a tool like that shown in the figure, and insert the blade into the sealant.
