mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Remote Transmitter - Will Not Lock/Unlock Doors|Page 4166 > < Keyless Unit Removal / Installation|Page 4157
Page 1
background image

Keyless Entry Transmitter: All Technical Service Bulletins
Remote Transmitter - Will Not Lock/Unlock Doors

Bulletin No.: 011/97
Issued: 06/19/97
Revised:

Category
T

Applicable Model/s
'96-97 MPV

Subject:
KEYLESS ENTRY TRANSMITTER INOPERATIVE

APPLICABLE MODELS / VIN
'96-97 MPV with VIN of JM3LV52**V0823981 and lower.

DESCRIPTION

The doors cannot be locked/unlocked using the keyless entry system transmitter. The transmitter becomes inoperative due to oscillator pin breakage
within the transmitter.

To prevent oscillator pin breakage, the oscillator has been secured to the base with adhesive. If you encounter a customer complaint for this concern,
replace the transmitter with a modified part

REPAIR INFORMATION

1.

Verify the complaint

2.

Inspect transmitter oscillator pins for damage.

^

If damaged is found, replace the transmitter and proceed to step 3.

^

If no damage is found, troubleshoot transmitter and keyless entry system. Repair as necessary.

3.

After replacing the transmitter, change the ID code according to the 1997 Workshop Manual, Section 9 or "Keyless Unit ID Code Change"

NOTE

1996 MPV refer to "Keyless Entry" in Mazda Tips of July, 1996

4.

Verify repair.

Remote Transmitter - Will Not Lock/Unlock Doors|Page 4166 > < Keyless Unit Removal / Installation|Page 4157