MPV ES 4WD V6-3.0L SOHC (1997)
Installation
1. Use a razor knife to remove the adhesive remaining on the body and side protector (if the side protector will be reused). Remove as much adhesive
as possible without damaging the painted surface. If the adhesive is difficult to remove, soften it by using a hot air blower.
2. Remove any grease or dirt from the adhesion surface of the side protector (if the side protector will be reused) and body.
3. Attach double-sided adhesive tape to the side protector as shown (if the side protector will be reused).
4. Align the side protector on the body and attach it securely.
