MPV ES 4WD V6-3.0L SOHC (1997)
Headliner: Service and Repair
Rear Headliner Removal / Installation
1. Disconnect the negative battery cable.
2. Remove the interior light.
3. Remove the B-pillar upper trim.
4. Remove the rear header trim.
NOTE: Remove the clips by using the fastener remover
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Install the rear header trim.
8. Install the B-pillar upper trim.
9. Install the interior light.
10. Connect the negative battery cable.
