MPV ES 4WD V6-3.0L SOHC (1997)
Water Pump: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Turn the crankshaft so that the No.1 cylinder is at TDC of compression.
3. Drain the engine coolant.
4. Remove the timing belt.
5. Remove the water pump.
6. Remove the water pump gasket.
INSTALLATION
1. Install in the reverse order of removal.
2. Fill the radiator and coolant reservoir with the specified amount and type of engine coolant.
3. Start the engine and check for coolant leaks.
