MPV ES 4WD V6-3.0L SOHC (1997)
Crankshaft: Testing and Inspection
End Play
1. Inspect the crankshaft end play.
End play: 0.080-0.282 mm (0.0032-0.0111 in)
Maximum: 0.30 mm (0.0118 in)
2. If the end play exceeds the maximum, grind the crankshaft and install an oversize thrust bearing or replace the crankshaft and thrust bearing.
Thrust bearing width
Standard: 2.000-2.050 mm (0.0788-0.0807 in)
0.25 mm (0.01 in) oversize: 2.125-2.175 mm (0.0837-0.0856 in)
0.50 mm (0.02 in) oversize: 2.250-2.300 mm (0.0886-0.0905 in)