MPV ES 4WD V6-3.0L SOHC (1997)
Speedometer Head: Testing and Inspection
Vehicle Speed Sensor
1. Remove the meter hood.
2. Remove the instrument cluster.
3. Loosen the screws for the A and B terminals.
NOTE: If the screw is loosened excessively, it will disengage from the speedometer, and you will not be able to measure the resistance properly.
4. Connect an ohmmeter between terminals A and B of the speedometer.
5. Verify that the ohmmeter needle pulsates while rotating the speedometer shaft with a screwdriver.
4 Pulses Per Shaft Revolution
6. If not as specified, replace the speedometer.
