MPV ES 4WD V6-3.0L SOHC (1997)
Injector Operation Testing Procedure
Injector Operation Testing Procedure
Injector Volume Test
WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. fuel can also irritate the
skin and eyes. To prevent this, always complete the "FUEL PRESSURE RELEASE PROCEDURE".
1. Remove the fuel injectors together with the fuel distributor.
2. Disconnect the fuel injectors.
3. Connect the Special Service Tool as shown in the figure.
4. Measure the injection volume of each fuel injector by using a graduated container.
Injection volume: 44 - 65 ml (44 - 65cc, 1.5 - 2.1 fl. oz.) per 15 sec.
5. If not as specified, replace the fuel injector.
Fuel Pressure Inspection
WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate the
skin and eyes. To prevent this, always complete the "FUEL PRESSURE RELEASE PROCEDURE".
1. Disconnect the negative battery cable.
2. Connect a fuel pressure gauge between the fuel filter (high pressure side) and fuel distributor.
