MPV ES 4WD V6-3.0L SOHC (1997)
Distributor: Testing and Inspection
WARNING: High voltage in the ignition device system can cause strong electrical shock. Avoid direct contact to the vehicle body during the
following spark test.
1. Remove the spark plug.
2. Connect the spark plug to a high-tension lead.
3. Hold the high-tension lead with insulated pliers 5 - 10 mm (0.20 - 0.39 in) from a ground.
4. Crank the engine and verify that there is a strong blue spark. If not, replace the spark plug or high-tension lead as necessary.