MPV ES 4WD V6-3.0L SOHC (1997)
Transfer Case Actuator: Testing and Inspection
Off-Vehicle Inspection
MOTOR INSPECTION
1. Connect battery voltage as shown and verify that the motor rotates clockwise.
2. Connect battery voltage as shown and verify that the motor rotates counterclockwise.
3. If not correct, replace the change motor.
LIMIT SWITCH INSPECTION
1. Set the change motor in a vise.
2. Verify that there is no continuity between terminals F and H by using an ohmmeter.
3. Turn the change motor shaft clockwise by using the Special Service Tool (SST) until continuity is shown.
