MPV ES 4WD V6-3.0L SOHC (1997)
Battery: Symptom Related Diagnostic Procedures
DRAW TESTING
1. Verify that the ignition switch is at the OFF position.
2. Disconnect the negative battery cable.
CAUTION: Operating electrical loads while measuring the dark current can damage the circuit tester.
3. Measure the dark current between the negative battery terminal and the negative battery cable.
20 mA max.
4. If the current exceeds the maximum, remove the fuse in the main fuse block and the fuse block one by one while measuring the dark current.
5. Inspect and repair harnesses and connectors of the fuse at which the current reduces.
