MPV ES 4WD V6-3.0L SOHC (1997)
8. Turn the steering wheel fully to the left and right and measure the fluid pressure generated by the gear housing. If the pressure is below the
specification, replace the gear housing assembly.
Gear housing fluid pressure: 7,601 - 8,335 kPa (1,103 - 1,208 psi).
9. Remove the gauge set. Install and tighten the high pressure hose to the specified torque.
Tightening torque: 32 - 47 Nm (24 - 34 ft. lbs.).
10. Bleed the air from the system.