MPV ES 4WD V6-3.0L SOHC (1997)
Steering Shaft: Service and Repair
DISASSEMBLY / ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly indicated in the illustration, referring to the following:
Steering Lock Mounting Bolts And Bracket Disassembly Note (5)
-
Use a chisel to make a groove in the head of the steering lock mounting bolts. Remove the bolts by using a screwdriver then remove the
steering lock component.
Steering Lock Mounting Bolts And Bracket Assembly Note (5)
-
Install the steering lock component on the jacket. Install new steering lock mounting bolts, and tighten them until the heads break off.