MPV ES 4WD V6-3.0L SOHC (1997)
Brackets, Bolts And Nuts Installation Positions Part 2 Of 2
ASSEMBLY
1. Verify that all parts are clean and free of dust and other small particles.
2. Apply ATF to all O-rings and gaskets.
3. Assemble in the order indicated in the illustration, referring to assembly procedure.
Assembly Procedure
1. Install the steel balls and reamer bolts into their proper positions of the upper valve body.
2. Install the pilot filter, orifice check spring, orifice check valve and accumulator filter into their proper positions in the lower valve body.