MPV ES 4WD V6-3.0L SOHC (1997)
Seals and Gaskets: Service and Repair
Front Differential Pinion Seal
1. Jack up the vehicle and support it on safety stands.
2. Drain the differential oil.
3. Remove the propeller shaft.
4. Before loosening the locknut, measure the rotation starting torque of the drive pinion (within the range of the drive pinion and ring gear backlash).
5. Hold the companion flange by using the Special Service Tool (SST), and remove the locknut.
6. Remove the companion flange by using the SST.
7. Remove the oil seal.
8. Apply a thin coat of lithium-based grease to the lip of a new oil seal, and install it by using the SST.
