MPV ES 4WD V6-30L SOHC (1997) - Drive/Propeller Shaft Replacement
Flange Nut (6)
1. Align the marks on the flange and shaft.
2. Install the lock washer and hand-tighten the flange nut.
3. Place the center companion flange in a vise.
4. Tighten the flange nut to 160 - 170 Nm (120 - 130 ft. lbs.).
5. Apply lithium-based grease to a new O-ring. Install the O-ring into the center companion flange.
No.2 Propeller Shaft Component (4)
1. Push a rag into the double-offset joint to prevent damage to the boot.
2. Place the No.1 propeller shaft in a vise.
