MPV ES 4WD V6-3.0L SOHC (1997)
Hub Bolt (7)
Install the new hub bolts by using a press.
Bearing (4)
Using the SST and a press, install a new bearing with the smooth side facing the wheel.
ABS Sensor Rotor (3)
Using a press, install a new ABS sensor rotor until it contacts the SST.
Bearing Collar (2)
1. Remove any grease or oil from the rear axle shaft and new bearing collar.
2. Install the bearing collar onto the rear axle shaft by using the SST. If 26,478 N (5,940 lbs.) or less is required to press the collar, replace
the shaft.