MPV ES 4WD V6-3.0L SOHC (1997)
Windshield Washer Motor: Service and Repair
Windshield Washer Motor Removal / Installation
1. Disconnect the negative battery cable.
2. Remove the right side front combination light.
3. Remove the windshield washer tank.
4. Extract the washer fluid.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Install the windshield washer tank.
8. Pour the washer fluid.
9. Install the right side front combination light.
10. Connect the negative battery cable.