MPV ES 4WD V6-3.0L SOHC (1997)
Windshield Washer Spray Nozzle: Service and Repair
Rear Washer Nozzle Removal
1. Apply protective tape to the body around the washer nozzle.
2. Insert a tape-wrapped, flathead screwdriver under the side of the nozzle (1) and push the nozzle clip.
3. Insert another tape-wrapped, flathead screwdriver under the rear of the (2)
4. Remove the first screwdriver and insert it under the side of the nozzle (3).
5. Disconnect the rear washer pipe from the washer nozzle to remove the nozzle.
