mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

MIL ON, DTCs P0140 & P0160 Set|Page 119 > < Interior Lighting Relay|Testing and Inspection|Page 108
Page 1
background image

Engine Control Module: All Technical Service Bulletins
MIL ON, DTCs P0140 & P0160 Set

Bulletin No.: 
007/00

Section:
01

Date: 
04/13/00

Subject:
MIL "ON" DTCS P0140/P0160 - FREEZE FRAME DATA NOT AVAILABLE

Applicable Model/s: 
2000 MPV

APPLICABLE MODEL(S)/VINS
All 2000 MPV with VINs lower than JM3 LW28G* Y0 135255.

DESCRIPTION

Some vehicles may exhibit MIL illumination with the following codes without freeze frame data stored in memory.

^

P0140: H02S (Rear, RH) circuit no activity detected.

^

P0160: HO2S (Rear, LH) circuit no activity detected.

This is caused by the PCM being misprogrammed. DO NOT replace the PCM.

Customers having this concern should have their vehicle repaired using the following procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

^

If DTC P0140 or P0160 is present and Freeze Frame Data is stored in memory, refer to the Workshop Manual (section 01-02A-93
DIAGNOSTIC PROCEDURE) and begin troubleshooting at STEP 1.

^

If DTC P0140 or P0160 is present and Freeze Frame Data is not stored in memory, refer to the Workshop Manual (section 01-02A-94
DIAGNOSTIC PROCEDURE), and begin troubleshooting at STEP 5 instead of STEP 1.

2.

Verify repair.

MIL ON, DTCs P0140 & P0160 Set|Page 119 > < Interior Lighting Relay|Testing and Inspection|Page 108