MPV LX V6-2.5L DOHC (2000)
1. Cut away the projecting rubber of the lower arm bushing.
2. Set the Special Service Tool (SST) onto the lower arm, and remove the bushing.
LOWER ARM BUSHING (REAR) REMOVAL NOTE
1. Mark the lower arm as shown in the figure by aligning with the small projection of the lower arm bushing (rear) for proper installation.
2. Remove the lower arm bushing using the SSTs and a press.
LOWER ARM BUSHING (REAR) INSTALLATION NOTE
1. Align the mark of the lower arm and the small projection of the lower arm bushing (rear) as shown in the figure.
