MPV LX V6-2.5L DOHC (2000)
Shift Solenoid: Service and Repair
SOLENOID VALVE REMOVAL/INSTALLATION
1. Remove the control valve body.
2. Remove the solenoid valve(s).
3. Apply ATF to a new O-ring and install it on the
4. Install the solenoid valve in the control valve body.
Tightening torque
6.5 - 7.8 Nm (66 - 80 kgf.cm, 58 - 69 inch lbs.)
5. Install the control valve body.
6. Add the ATF while the engine is idling, and inspect the ATF level and leakage.
7. Carry out the time lag test and line pressure test.
8. Carry out the road test.
