mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Audio System - Radio Cuts Out At High Volume Bass|Page 4232 > < Radio - Cuts Out At High Volume/Bass|Page 4226
Page 1
background image

Radio/Stereo Noise Filter: Customer Interest
Audio System - Radio Cuts Out At High Volume Bass

T006/98

RADIO CUTS OUT AT HIGH VOLUME/BASS

APPLICABLE MODELS
1997 MPV models, between VIN range 3M3LV52** V0819807 and V0823576.

DESCRIPTION

The sound from the audio system (radio) may cut out when the volume or bass dial is turned up past 3/4 range. This concern is caused when voltage is
discharged from the condenser of the filter in the speaker output circuit, which activates the mute of the audio power integrated circuit and causes the
sound to cut out. Resistors have been added to the filter to prevent this concern.

NOTE:

It is not necessary to install complete audio unit assembly.

Customers complaining of this subject should have the vehicle inspected and if necessary, use the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Remove the audio unit and CD unit or storage box, if equipped, according to the Workshop Manual.

3.

Remove the filter assembly from the instrument panel harness by carefully unpeeling the electrical tape. Refer to illustration.

4.

Install the modified noise filter assembly and reassemble the parts in the reverse order of removal.

CAUTION:

Re-tape the filter to the harness to prevent internal noise in dash.

5.

Verify repair.

PARTS INFORMATION

Audio System - Radio Cuts Out At High Volume Bass|Page 4232 > < Radio - Cuts Out At High Volume/Bass|Page 4226