mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Door Lock and Opener Removal / Installation|Page 4484 > < Diagram Information and Instructions|Page 4481
Page 1
background image

Door Locks: Service and Repair
Front Door Lock and Opener Removal / Installation

1. Raise the door glass 180 mm (7.09 in) from the fully lowered position.
2. Disconnect the negative battery cable.
3. Remove the front door trim.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Install the front door trim.
7. Connect the negative battery cable.

Front Door Lock and Opener Removal / Installation|Page 4484 > < Diagram Information and Instructions|Page 4481