MPV LX 4WD V6-3.0L SOHC (1997)
Disclaimer
Front Grille Guard Replacement
1.
Raise hood and support with prop.
2.
Remove the following:
^
Two (2) rivets
^
Retainer clip
3.
Disengage Tab "A" and "B" and remove grille guard from grille.
4.
Position grille guard over grille.
5.
Bend Tab "A" (four (4) places) rearward to engage behind the vertical grille ribs.
6.
Snap Tab "B" (tour (4) places, top and bottom) to engage around vertical ribs on grille.
7.
Securely fasten two (2) rivets through Tab "C" (two (2) places.
8.
Install the retainer clip to the upper inside edge of the grille guard to fasten against the backside of the grille.
NOTE:
The retainer clip should be centered between the two (2) locator ribs on the grille guard.
9.
Close hood.