MPV LX 4WD V6-3.0L SOHC (1997)
2.
Remove tour (4) rivets and Stone guard.
3.
Clean front bumper facia.
4.
Align four (4) slots and tour (4) bolt holes on stone guard and undercover.
5.
Loosely attach stone guard with bolts.
6.
Tighten all bolts.
CAUTION:
Take care not to cross-thread bolts.
Roof Rack Replacement
1.
Loosen and remove the eight (8) Phillips head shoulder screws.
2.
Remove roof rack assembly and foot pads.
3.
Align side rails and cross bars.
CAUTION:
To protect the roof rack surface, use a protected bench surface to perform alignment.