MPV LX 4WD V6-3.0L SOHC (1997)
Brake Master Cylinder: Service and Repair
Master Cylinder, ABS
Replacement
1. Remove in the order indicated in the table.
NOTE: Check the clearance between the push rod of the power brake unit and the piston of the master cylinder. See: Adjustments
2. Install in the reverse order of removal indicated in the table.
^
Bleed brakes. See: Brake Bleeding/Service and Repair
Overhaul
CAUTION:
^
The brake master cylinder is made of aluminum, and can be easily damaged by tightening in a vise. When securing the master cylinder in a vise,
tighten only the master cylinder flange.
^
If the master cylinder body is damaged, replace the unit as an assembly.
1. Disassemble in the order indicated in the table.