MPV LX 4WD V6-3.0L SOHC (1997)
Snap Ring Disassembly Note:
^
Push the piston in to remove or install the snap ring by using snap-ring pliers.
Secondary Piston Disassembly Note:
^
Remove the secondary piston component by gradually blowing compressed air into the cylinder.
2. Assemble in the reverse order of removal indicated in the table.
Stop Pin And O-Ring Assembly Note
1. Install the secondary piston component with the piston hole facing the stop pin.
2. Install and tighten a new O-ring and stop pin.
3. Push and release the piston to verify that it is held by the stop pin.