MPV LX 4WD V6-3.0L SOHC (1997)
Acceleration/Deceleration Sensor: Testing and Inspection
1. Turn the ignition switch to ON, then measure the voltage between the output terminal (b) and ground terminal (a) of the G sensor connector.
a. Level condition.
-
Voltage 2.4-2.6 V.
b. G sensor vertical (arrow up).
-
Voltage 1.3-1.7 V.
c. G sensor vertical (arrow down).
-
Voltage 3.3-3.7 V.
2. If not as specified, replace the G sensor.