MPV LX 4WD V6-3.0L SOHC (1997)
Blower Motor Resistor: Testing and Inspection
Rear Resistor
1. Disconnect the negative battery cable.
2. Slide the driver's seat backward.
3. Disconnect the rear heater resistor connectors.
4. Check the 10A fuse (between terminals 1A and 2C).
5. If the 10A fuse is burnt, replace it.
6. Check for continuity between rear heater resistor terminals by using an ohmmeter.
7. Check for continuity between the rear heater resistor terminals by using an ohmmeter.
8. If not as specified, replace the rear heater resistor.