MPV LX 4WD V6-3.0L SOHC (1997)
Turn Signal Flasher: Testing and Inspection
1. Remove the driver's side front scuff plate.
2. Remove the driver's side front side trim.
3. Remove the flasher unit without disconnecting the connector.
4. Measure the voltage at the flasher unit terminals as indicated below.
5. Disconnect the flasher unit connector before checking for continuity at terminal A.
6. If not as specified, inspect the related wiring harnesses.
7. If the parts and wiring harnesses are okay but the system still does not work properly, replace the flasher unit.