mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Combination Lamp - Falls Out of Body|Page 5266 > < Front Combination Lamp - Falls Out of Body|Page 5260
Page 1
background image

Turn Signal Lamp: Customer Interest
Front Combination Lamp - Falls Out of Body

Bulletin No.: 014/97
Issued: 08/20/97
Revised:

Category
T

Applicable Model/s
1996-97 MPV

Subject:
FRONT COMBINATION LAMP FALLS OUT IF BODY

APPLICABLE MODELS
1995-97 MPV with a VIN of JM3LV52**V0819171 and lower.

DESCRIPTION

The front combination lamp may vibrate loose and fall out of the installed position in the front fender. The width of the slot on the mounting bracket has
been reduced (7.0 mm to 5.2 mm) and a "star" washer is added to the installation screw to provide a more secure fit Customers complaining of this
concern should have the vehicle inspected and a modified lamp installed, if necessary.

REPAIR PROCEDURE

1.

Verify the complaint.

2.

Install modified lamp(s) and screw(s). Tighten screw to 9-13 in. lbs. (10-15 kg-cm)

PARTS INFORMATION

WARRANTY INFORMATION

Front Combination Lamp - Falls Out of Body|Page 5266 > < Front Combination Lamp - Falls Out of Body|Page 5260