MPV LX 4WD V6-3.0L SOHC (1997)
Turn Signal Switch: Service and Repair
Combination Switch Disassembly / Assembly
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the steering wheel.
4. Remove the column cover.
5. Remove the combination switch.
6. Disassemble in the order indicated in the table.
7. Assemble in the reverse order of disassembly.
8. Install the combination switch.
9. Install the column cover.
10. Install the steering wheel.
11. Install the driver-side air bag module.
12. Connect the negative battery cable.
