mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Emission Control Systems > < Transmission Position Switch/Sensor, A/T|Specifications|Page 2097

MPV LX 4WD V6-3.0L SOHC (1997)

Page 1
background image

Transmission Position Switch/Sensor: Service and Repair

REPLACEMENT 

1. Remove the selector cable, manual shaft nut, and lever.
2. Remove the transmission range switch.
3. Install the transmission range switch.
4. Adjust the transmission range switch.
5. Install the lever and manual shaft nut and tighten to 30 - 39 Nm (22 - 28 ft. lbs.).
6. Install the selector cable.

Emission Control Systems > < Transmission Position Switch/Sensor, A/T|Specifications|Page 2097