mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Dropping Resistor, A/T|Specifications|Page 2673 > < Dropping Resistor, A/T|Specifications

MPV LX 4WD V6-3.0L SOHC (1997)

Page 1
background image

Dropping Resistor: Testing and Inspection

1. Disconnect the dropping resistor connector.
2. Measure the resistance of the terminals. Resistance should be within 10 - 14 ohms.
3. If not correct, replace the dropping resistor.
4. Connect the dropping resistor connector.

Dropping Resistor, A/T|Specifications|Page 2673 > < Dropping Resistor, A/T|Specifications