MPV LX 4WD V6-3.0L SOHC (1997)
Remove the oil seal.
Assembly Procedure
1. Apply ATF to the parking actuator, and install it in the extension housing. Tighten to 24 - 29 Nm (18 - 21 ft. lbs.).
2. Apply ATF to the parking pawl shaft and install it in the extension housing.
3. Apply ATF to the parking pawl, return spring, and spacer, then install them in the extension housing.
4. Apply ATF to the lip surface of a new oil seal and install it onto the manual shaft.
5. Wrap the threads of the manual shaft with tape.
6. Apply ATF to the bearing in the transmission case.
7. Install the manual shaft into the transmission case.
8. Push the oil seal squarely into the transmission case.
9. Remove the tape.
