MPV LX 4WD V6-3.0L SOHC (1997)
Transmission Cooler: Service and Repair
Without Tow Package
REMOVAL / INSTALLATION
1. Remove in the order indicated in the illustration.
2. Install in the reverse order of removal indicated in the illustration, referring to the installation note.
Installation Note
Oil Hose (5)
1. Align the marks, and slide the oil cooler hose onto the oil cooler pipe until it is fully seated against the ridge.
2. Install the hose clamp onto the hose at the center of the mark and at the angle shown.
3. Verify that the hose clamp does not interfere with any other part.
