MPV LX 4WD V6-3.0L SOHC (1997)
Wiper Motor: Service and Repair
Windshield Wiper Motor Removal / Installation
1. Disconnect the negative battery cable.
2. Disconnect the windshield wiper motor connector.
3. Remove the nuts to remove the windshield wiper motor bracket.
4. Pry off the connection between the windshield wiper motor and windshield wiper link.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Connect the windshield wiper link to the windshield wiper motor.
8. Install the windshield wiper motor bracket.
9. Connect the windshield wiper motor connector.
10. Connect the negative battery cable.
