MPV LX 2WD V6-3.0L SOHC (1998)
Antenna: Service and Repair
Antenna
1. Disconnect the negative battery cable.
2. Remove the passenger's side front scuff plate.
3. Remove the passenger's side front side trim.
4. Remove the windshield molding.
5. Remove the right side front mud guard.
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal indicated in the table.
8. Install the right side front mud guard.
9. Install the windshield molding.
10. Install the passenger's side front side trim.
11. Install the passenger's side front scuff plate.
12. Connect the negative battery cable.
Mounting Nut Removal Note
^
Use snap-ring pliers to remove the mounting nut.