MPV LX 2WD V6-3.0L SOHC (1998)
Seats: Service and Repair
Removal/Installation
Front Seat
1. Disconnect the negative battery cable.
2. Disconnect the driver's buckle connector.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Connect the driver's buckle connector.
6. Connect the negative battery cable.
Rear Seat No.1 (Type I)
1. Remove the rear seat No.1 installation bolts, and remove the rear seat No.1.
2. Install in the reverse order of removal.
Tightening torque