MPV LX 2WD V6-3.0L SOHC (1998)
Parking Brake Cable: Service and Repair
REMOVAL / INSTALLATION
1. Release the parking brake and remove the parking brake lever adjusting nut.
2. Remove the front cabin carpet.
3. Jack up the vehicle and support it on safety stands.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal indicated in the table.
6. After installation, check the parking brake lever stroke.
Disc Plate Removal Note (2)
1. Mark the wheel hub bolt and disc plate before removal for reference during installation.
2. If the disc plate is difficult to remove, loosen the parking brake shoes as described below.
1) Remove the service plug from the disc plate.
2) Insert a screwdriver into the hole, and turn the adjuster in the opposite direction of the arrow marked on the disc plate.
